Overhead Crane

Home>>Products>>Overhead Crane>>Crane Track Rail

Crane Track Rail

Product Name: Crane Track Rail

Models: QU70, QU80, QU120, etc.

Application: overhead crane, gantry crane, RMG crane, STS, portal crane, etc.

 

 

Crane track rail provides a continuous, smooth and low-resistance rolling surface for the crane wheels. It is employed to guide the wheels of the crane, bear the pressure of the wheel, and transmit it to the sleeper and ground. 

INQUIRY LIVE CHAT

Crane track rail provides a continuous, smooth and low-resistance rolling surface for the crane wheels. It is employed to guide the wheels of the crane, bear the pressure of the wheel, and transmit it to the sleeper and ground. Crane track rails are commonly used for bridge crane, gantry crane, RMG crane, STS, portal crane, etc.

Modular Cranes – Modular cranes are typically found in smaller manufacturing facilities, smaller-sized mills, or machine shops, and have a design consisting of a more base-level hoist, trolley, and bridge. They’re economical and affordable solutions to moving material through a facility and don’t normally come with a lot of extra bells and whistles. These cranes are typically Class C and are being used at around 40% capacity, but can be bumped up to Class D with extra engineering built-in if the lifting application requires it.

Weihua provide all kinds of crane track railmodels such as QU70, QU80, QU120, etc. for the different cranes and special conditions. P shape rail is the most commonly used. The crane track system including rails, clips, bolts, nuts, etc.

Installation detection: Pulling wire rope to detect the linearity of rails. Pulling a diameter 0.5mm wire rope between two ends stop lever, and using a plumb bob to detect point by point, and the interval should be 2 meter. The rail joints could be cut into straight joint or 45°oblique joint.

Leave A Message

Related Products

Products

WhatsApp